atmel rfid tag The Atmel® ATA5575M1 is a contactless read/write identification IC (IDIC®) for applications in the 100-kHz to 150-kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bi-directional
$26.99
0 · rfid ics
1 · atmel rfid ics
2 · atmel rfid
It doesn't have an NFC reader, but most third-party controllers don't have this and it's only of .
100 -150kHz RFID ICs for access control and animal ID tags . Through continuous .These are the following features of read/write LF RFID IDIC 100 kHz to 150 kHz: Contactless Power Supply. Contactless Read/Write Data Transmission. Radio Frequency fRF from 100 kHz to 150 kHz. Basic mode or Extended mode. Compatible with T5557, ATA5567. Replacement for e5551/T5551 in Most Common Operation modes.100 -150kHz RFID ICs for access control and animal ID tags . Through continuous improvement and innovation, Atmel is able to present a product scope that covers all semiconductors required for RFID tags .
The ATA5577M1C is a contactless read/write IDIC designed for applications in the 100 to 150 kHz frequency band. A single coil connected to the chip serves as the IC's power supply and bi-directional communication interface. The antenna and chip together form a transponder or tag.Tuning the RFID tag to resonate at the carrier frequency produces the maximum communication range. This tuning is accomplished by matching the antenna inductance with a tuning capacitor to produce resonance at 13.56 MHz. The equation for resonance is: For these RFID ICs, the resonant frequency f0 is 13.56 MHz, L is the antennaThe Atmel® ATA5575M1 is a contactless read/write identification IC (IDIC®) for applications in the 100-kHz to 150-kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bi-directionalThe Atmel® ATA5575M2 is a contactless read/write identification IC (IDIC®) for applications in the 100-kHz to 150-kHz frequency band. A single coil connected to the chip serves as the IC's power supply and bi-directional communication
rfid ics
The ATMEL® ATA5577 is a widely used RFID chip designed for the low frequency band (125kHz). Thanks to its stable performance, easy programming features, and low power consumption, it has become a top choice for many low-frequency RFID systems.The Atmel® ATA5505-EK1 kit is a USB-LF-RFID reader in memory stick format based on the Atmel ATA5505 LF-Reader-AVR circuit. The kit operates at 125kHz and 134.2kHz and supports all previously mentioned LF applications. Just plug into .Today, Atmel is a key player for low-frequencybased 100 -150kHz RFID ICs for access control and animal ID tags. Through continuous improvement and innovation, Atmel is able to present a product scope that covers all semiconductors required for RFID tags.
This LF RFID kit is available to demonstrate the key features of various RFID products. The included software supports the following products: U2270B, TK5530/e5530, TK5551, TK5552/T5552, ATA5567 (T5557) comp. mode and TK5561.These are the following features of read/write LF RFID IDIC 100 kHz to 150 kHz: Contactless Power Supply. Contactless Read/Write Data Transmission. Radio Frequency fRF from 100 kHz to 150 kHz. Basic mode or Extended mode. Compatible with T5557, ATA5567. Replacement for e5551/T5551 in Most Common Operation modes.
100 -150kHz RFID ICs for access control and animal ID tags . Through continuous improvement and innovation, Atmel is able to present a product scope that covers all semiconductors required for RFID tags .The ATA5577M1C is a contactless read/write IDIC designed for applications in the 100 to 150 kHz frequency band. A single coil connected to the chip serves as the IC's power supply and bi-directional communication interface. The antenna and chip together form a transponder or tag.Tuning the RFID tag to resonate at the carrier frequency produces the maximum communication range. This tuning is accomplished by matching the antenna inductance with a tuning capacitor to produce resonance at 13.56 MHz. The equation for resonance is: For these RFID ICs, the resonant frequency f0 is 13.56 MHz, L is the antennaThe Atmel® ATA5575M1 is a contactless read/write identification IC (IDIC®) for applications in the 100-kHz to 150-kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bi-directional
The Atmel® ATA5575M2 is a contactless read/write identification IC (IDIC®) for applications in the 100-kHz to 150-kHz frequency band. A single coil connected to the chip serves as the IC's power supply and bi-directional communicationThe ATMEL® ATA5577 is a widely used RFID chip designed for the low frequency band (125kHz). Thanks to its stable performance, easy programming features, and low power consumption, it has become a top choice for many low-frequency RFID systems.The Atmel® ATA5505-EK1 kit is a USB-LF-RFID reader in memory stick format based on the Atmel ATA5505 LF-Reader-AVR circuit. The kit operates at 125kHz and 134.2kHz and supports all previously mentioned LF applications. Just plug into .
Today, Atmel is a key player for low-frequencybased 100 -150kHz RFID ICs for access control and animal ID tags. Through continuous improvement and innovation, Atmel is able to present a product scope that covers all semiconductors required for RFID tags.
atmel rfid ics
atmel rfid
hk immigration smart id card
Softonic review. NFC Reader: A Reliable Contactless IC Card Reader. NFC Reader, developed by Cache.Wind, is a free Android utility and tool that allows users to read .
atmel rfid tag|atmel rfid